-
Boought a PT 16 have two brackets dont know what they do or what for
They have about a 2 " flat surface with a velcro straap..handle is about 8" long and has one thumb scrrew on bottom???WWhat is it???
-
Bolts for motor well
I have a sweetwater 2286fc. How many bolts should there be holding the motor well to the frame, Is the motor well re-enforced at the stern? Thanks
-
Dimensional drawings
One of my seats leaks slightly too, no biggy, the items I don't want to get wet are in a heavy duty poly storage bag. There are after market, lockable, waterproof boxes that can be secured (screwed down) under a seat for your valuables, also, there are lockable glove boxes available that can be installed in the console,…
-
Who manufactured the 50 hp Force outboard motor on my 1989 Sweetwater SW2420?
I am having a difficult time locating a manual for the 50 hp Force outboard engine on my pontoon. I have been trying to locate the engine through the manufacturer of the engine, but the internet lists both Chrysler and Mercury as manufacturers. Any help in locating the correct manual will be appreciated.
-
Anodes for pontoons
Hello, I am very new to boating and to this site. Our 15" Sweetwater pontoon boat is in need of anhodes. It is kept in the Conndcticut River in the summer and on a trailer in winter. Any suggestions are appreciated.
-
Engine Manuals
Anyone know where I can purchase a manual for a Force/Chrysler 50 hp outboard engine? Just purchased an 89 pontoon. It runs very well, but still would like to have the manual.
-
Follow up Question For 1987 SW615. How Do I Get water out of the front of the Pontoon?
Drain Plug on back of Pontoon let no water out. Tilled Boat almost straight up. Water still in front part of Pontoon.
-
bimini frame
Hello i just ordered a bimini frame from my local dealer he was told it would be 3 months, Is this normal wait time for replacement parts? it will be a hot summer without it. Sweetwater 1880 re tuscany series 2007. Thank you.
-
Manuals or literature
Purchase a 280s model 1999. Are there manuals, literature or something that will contain console wiring info ?
-
The rail skin was damaged.
Rail skin was damaged prior to delivery. I suspect it happened during the rolling process. How long will it take to get another one to dealer and what is the replacement service replacement time?
-
What Year is boat?
Just got a Used Model SW615 Sweetwater Executive Cruiser GDY1712MK687 16ftx6ft Do not Know the Year, and What is the H.P. Capacity?
-
Best hoist for 2086 in 18" of water?
I am awaiting a 2013 Sweetwater 2086 (20') Pontoon. In the meantime I am looking for a hoist. I originally wanted one that I can add a canopy on but apparently my lakeshore of 18" is not deep enough for certain ones. I was quoted $2,249 for a Craftlander 3,200 lbs holds up to a 22'. I have a sandybottom on the northside of…
-
Leaking air from pontoon lifters
Is there a way to eliminate the annoying air leaking from the pontoon lifter on my SW 2086? It happens when I first get back to the dock and continues until all the air is out of the lifter. It only happens on the port side. My guest think my boat is sinking. Very embarrassing.
-
question for admin
hi there are a few brass nuts embedded in my lower helm station on my 18ft. Looks like something should attach to it. My dealer has no idea. Am I missing a part? thanks CRF
-
mooring whips
can i rig mooring whips on eyes on the pontoons safe. cleats that came installed if used will cause lines to rub on boat